Switch-On Conditions - BMW Night Vision Service Information

Switch-On Conditions

BMW Night Vision is activated as soon as the button in the light switch center is pressed.
The following basic conditions can exist:
• The rain/light sensor detects sufficient
ambient light and the driving lights are
switched off; BMW Night Vision is ready for
operation approx. 2 seconds after the button
in the light switch center is pressed. A mes-
sage is shown in the control display during
this period of 2 seconds.
• The rain/light sensor detects insufficient
ambient light and the driving lights are
switched on; BMW Night Vision is ready for
operation immediately after the button is
pressed.
• In conditions of darkness (underground
car park), the driving lights are switched off
and the driving speed is less than 5 km/h;
BMW Night Vision is ready for operation
after the button in the light switch center is
pressed.
BMW Night Vision cannot be activated when:
• the driving lights are switched off,
• the rain/light sensor detects insufficient ambient light, and
• the driving speed is greater than 5 km/h
Once BMW Night Vision has been activated, a message appears in the control display to
the effect that the system cannot be used at night without driving lights.
16
BMW Night Vision
Switch/Button on E65/66
Switch/Button on E60/E61/E63/E64