Table of Contents
Advertisement
Select the Create an MS-DOS startup disk check box.
d.
Click Start.
e.
2.
Copy the original or the latest motherboard BIOS file to the bootable floppy disk.
2.1.3
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through
the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash 2
utility is built in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-
On Self Tests (POST).
To update the BIOS using EZ Flash 2:
1.
Visit the ASUS website at www.asus.com to download the latest BIOS file for this
motherboard.
2.
Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.
3.
You can launch the EZ Flash 2 in two ways:
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the floppy disk
drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash 2 and press
<Enter> to enable it.
You can switch between drives by pressing <Tab> before the correct file is found.
Then press <Enter>.
4.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
• This function can support devices such as USB flash disk, or floppy disk with FAT 32/16
format and single partition only.
• Do not shut down or reset the system while updating the BIOS to prevent system boot
failure!
ASUS P5QPL-VM
ASUSTek EZ Flash 2 BIOS ROM Utility V3.26
EON 25P/F80
Current ROM
P5QPL-VM
0303
(H:00 B:05)
08/25/2008
[Tab] Switch
[B] Backup
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[V] Drive Info
[Esc] Exit
2-3
Advertisement
Table of Contents
