1. Manuals
  2. Brands
  3. pellenc Manuals
  4. Blower
  5. AIRION 3
  6. Operating instructions manual

pellenc AIRION 3 Operating Instructions Manual

Hide thumbs Also See for AIRION 3:
Table of Contents

Advertisement

Quick Links

Download this manual
ENG
.
Translation of the
original user guide
BLOWER
AIRION 3
57 - 147010-C
Operating instructions
08/2020
READ THE USER GUIDE CAREFULLY BEFORE USE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIRION 3 and is the answer not in the manual?

Questions and answers

Related Manuals for pellenc AIRION 3

Summary of Contents for pellenc AIRION 3

  • Page 1 Translation of the original user guide BLOWER AIRION 3 57 - 147010-C Operating instructions 08/2020 READ THE USER GUIDE CAREFULLY BEFORE USE...

  • Page 3: Table Of Contents

    2.1.5. BATTERY TOOL USE AND CARE ..................... 2.1.6. SERVICE ............................2.1.7. TOOL’S END-OF-LIFE MANAGEMENT ....................2.2. SAFETY INSTRUCTIONS FOR THE BLOWER AIRION 3 ............. 2.3. SAFETY MEASURES ASSOCIATED WITH BATTERY USE ............2.4. SAFETY SIGNAGE .......................... 2.5. PERSONAL PROTECTION EQUIPMENT (PPE) ................
  • Page 4 9.2. OPTIONAL ACCESSORIES ......................10. WARRANTIES ........................34 10.1. GENERAL WARRANTIES ......................10.1.1. STATUTORY WARRANTY ......................10.1.2. COMMERCIAL WARRANTYPELLENC .................... 10.1.3. PAID AFTER-SALES SERVICE ...................... 11. EC STATEMENT OF COMPLIANCE ................. 37 11.1. "EC" DECLARATION OF CONFORMITY: AIRION 3 ..............

  • Page 5: Introduction

    57 - 147010-C 1. INTRODUCTION Dear Customer, Thank you for purchasing your Blower AIRION 3. Correctly used and maintained, this tool will give a satisfactory performance for many years. Warning Your device contains numerous recoverable or recyclable materials. Return it to your dealer or, failing this, to an approved servicing centre to be treated.

  • Page 6: Safety

    BLOWER AIRION 3 57 - 147010-C 2. SAFETY 2.1. GENERAL POWER TOOL SAFETY WARNINGS Warning Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious injury.

  • Page 7: Power Tool Use And Care

    BLOWER AIRION 3 57 - 147010-C Use personal protective equipment. Always wear eye protection. Safety equipment such as dust masks, non-slip safety shoes, helmets, or ear protection used at the appropriate times reduces injuries. Avoid accidental starting of the tool. Make sure the switch is in the off position before you connect the tool to the power source and/or battery pack, pick it up, or carry it.

  • Page 8: Service

    2.1.7. TOOL’S END-OF-LIFE MANAGEMENT When the tool reaches the end of its life, PELLENC keeps the end of life sheet of the equipment at disposal. The end of life sheet provides instructions for safely removing components.

  • Page 9: Safety Signage

    • Battery alone: product that is classified as class 9, UN3480. 14. Use of a battery other than that provided by Pellenc SA is dangerous (risk of serious injury). If a different battery is used, Pellenc SA cannot be held responsible for any consequences.

  • Page 10: Personal Protection Equipment (Ppe)

    BLOWER AIRION 3 57 - 147010-C Nobody must stand within 5 m (16ft) of the tool in operation. Never put your fingers or insert objects into the air intake grill. When the intake grill is not fitted, there is a risk of contact with rotating parts - risk of injury! - risk of damaging the rotating elements.

  • Page 11: Description And Technical Characteristics

    BLOWER AIRION 3 57 - 147010-C 3. DESCRIPTION AND TECHNICAL CHARACTERISTICS 3.1. DESCRIPTION OF THE TOOL Blower AIRION 3 Standard blower nozzle dia. 75mm Holding clips for the power cord Stud Tool power cord 10. Protective casing Control handle 11. Axial turbine Speed / mode selection button 12.

  • Page 12: Technical Characteristics

    BLOWER AIRION 3 57 - 147010-C 3.2. TECHNICAL CHARACTERISTICS Effective thrust* - N 17.5 (boost)/13.5 (speed 4) Max power (W) Power supply voltage (V) 43.2 Weight of the tool with cable (kg) Weight of the tool without the cable (kg) 2.45...

  • Page 13: Commissioning

    BLOWER AIRION 3 57 - 147010-C 4. COMMISSIONING 4.1. CONTENT OF THE KIT Check that the box contains: • A delivered with: • 1 standard blower nozzle, diameter: 75mm (8) • 1 Allen wrench (15) • 1 user guide • 1 warranty notice 4.2.

  • Page 14: Assembly / Disassembly Of The Ergonomic Elbowed Nozzle

    BLOWER AIRION 3 57 - 147010-C 4.3. ASSEMBLY / DISASSEMBLY OF THE ERGONOMIC ELBOWED NOZZLE (OPTIONAL] 4.3.1. MOUNTING Choose the working position for the ergonomic el- bowed nozzle according to the blowing work to be performed: • Detail A: 'COMFORT' position.

  • Page 15: Fitting/Removing The Blower Scraper (Optional)

    BLOWER AIRION 3 57 - 147010-C 4.4. FITTING/REMOVING THE BLOWER SCRAPER (OPTIONAL) 4.4.1. MOUNTING Set up the wire scraper (18) in the guide ring (19) and the support ring (20) by pressing on the rods. Align the rods on the wire scraper (18) with the notches and fit the unit onto the outlet blowing noz- zle (8).

  • Page 16: Connecting The Extension

    BLOWER AIRION 3 57 - 147010-C Remove the assembly from the outlet blowing noz- zle (8). Extract the wire scraper (18) from the support ring (20) and the guide ring (19) by pressing on the rods. 4.5. CONNECTING THE EXTENSION The extension cord makes it easy to connect the tool using its quick connector, see Section 9, “Accessories and...

  • Page 17: 260 / 520 Alpha Batteries

    BLOWER AIRION 3 57 - 147010-C Fit the pin of the quick connector into the harness buckle Give the quick connector one quarter of a turn to keep it in position. 4.5.2. 260 / 520 ALPHA BATTERIES Connect the battery to the harness, making sure it is correctly oriented (see harness assembly instruc- tions).

  • Page 18: Removing The Extension Cord

    4.6. REMOVING THE EXTENSION CORD 4.6.1. 750 / 1200 / 1500 ULIB BATTERIES Disconnect the battery, see Section 4.8, “Discon- necting PELLENC batteries from the tool”. Turn the quick connector a quarter turn to remove the extension cord from the harness strap.

  • Page 19: Connecting Pellenc Batteries To The Tool

    To prolong the life of the connectors, it is advisable to protect them when they are disconnected. Avoid leaving the connectors in contact with abrasive or dirty surfaces, or subjecting them to major impacts (falls). For more information on PELLENC batteries, please refer to the battery instruction manuals.

  • Page 20: Disconnecting Pellenc Batteries From The Tool

    To prolong the life of the connectors, it is advisable to protect them when they are disconnected. Avoid leaving the connectors in contact with abrasive or dirty surfaces, or subjecting them to major impacts (falls). For more information on PELLENC batteries, please refer to the battery instruction manuals. • Disconnect the tool’s power cord (2) from the extension...

  • Page 21: Using The Tool

    BLOWER AIRION 3 57 - 147010-C 5. USING THE TOOL 5.1. HOLDING THE TOOL The Blower is designed to be operated with one hand. The user can carry it holding the control handle with the left or right hand. Always walk slowly while blowing the leaves, green waste, or urban waste to one side or the other.

  • Page 22: Start-Up

    BLOWER AIRION 3 57 - 147010-C 5.3. START-UP Hold the tool in its operating position, with the outlet blowing nozzle pointing to the ground. Turn on the battery by pressing the On/Off button, see Section 5.2, “Turning on and turning off the bat- tery”...

  • Page 23: Speed Selector

    BLOWER AIRION 3 57 - 147010-C Release the trigger (6) to stop the tool Important Make sure to maintain a sufficient distance (at least 30 cm) between the suction nozzle and any loose surface material on the floor, wall, or ceiling, such as sand, gravel, liquids, etc. Such loose materials are likely to be sucked in, pass through the intake screen, damage your equipment, and be ejected at high speed.

  • Page 24: Booster" Mode

    BLOWER AIRION 3 57 - 147010-C * with standard blower nozzle dia. 75mm. ** with blower nozzle dia. 65mm. *** with a flat nozzle accessory. **** with ergonomic elbow nozzle accessory. 5.5. “BOOSTER” MODE The blower has a "booster" mode which gives the maxi- mum power (940W) instantly.

  • Page 25: Carrying (Optional)

    Turn off the battery, seeSection 5.2, “Turning on and turning off the battery”. Disconnect the tool from the battery, see Sec- tion 4.8, “Disconnecting PELLENC batteries from the tool”. Make loops with the tool’s power cord (2) and secure it to the back of the handle with the holding clips (1).

  • Page 26: Service

    6.1. MAINTENANCE ADVICE Caution Always disconnect the tool battery before starting tool maintenance. • Use products recommended by PELLENC. • In the event of any problem, consult an authorised PELLENC distributor. 6.2. TOOL MAINTENANCE TABLE Every year At each After each use...
  • Page 27 57 - 147010-C Ensure that air intake grille holes are not obstructed. Visually inspect the condition of the intake screen. If a replacement is necessary, contact your authorised PELLENC distributor. Check the condition of the rotor visually. If a replacement is necessary, contact your authorised PELLENC distributor.

  • Page 28: Incidents And Troubleshooting

    BLOWER AIRION 3 57 - 147010-C 7. INCIDENTS AND TROUBLESHOOTING...
  • Page 29 BLOWER AIRION 3 57 - 147010-C...

  • Page 30: Storage And Transport

    BLOWER AIRION 3 57 - 147010-C 8. STORAGE AND TRANSPORT 8.1. STORAGE • Switch off the tool (see Section 5.8, “After each use”). • Disconnect the battery (see Section 5.8, “After each use”). • Store the battery (refer to the battery operating instructions).

  • Page 31: Accessories And Consumables

    BLOWER AIRION 3 57 - 147010-C 9. ACCESSORIES AND CONSUMABLES 9.1. ACCESSORIES INCLUDED Name Reference Anti-wear outlet nozzle 122862 Holding clips for the power cord 101056 Allen wrench 45792 9.2. OPTIONAL ACCESSORIES Name Reference Snap hook to carry accessories 131701...
  • Page 32 BLOWER AIRION 3 57 - 147010-C Name Reference Flat nozzle 122865 Tool hook 86708 Accessory scraper blower 102930 Elbow end piece kit 131967 Name Reference Comfort harness 57194 PELLENC ALPHA 260 battery 57192 PELLENC ALPHA 520 battery 57193 EXTENSION CORD...
  • Page 33 BLOWER AIRION 3 57 - 147010-C Name Reference Comfort harness 57183 1200 Ultra Lithium Battery 57253 1500 Ultra Lithium Battery 57254 EXTENSION CORD 57238 Name Reference Comfort harness 57183 750 Ultra Lithium Battery 57191 EXTENSION CORD 57238 Name Reference 750 ULiB battery harness...

  • Page 34: Warranties

    The warranty is fully integral to the product sold by PELLENC. 10.1.2.1.2. SPARE PARTS The commercial warranty also covers original PELLENCspare parts, excluding labour and to the exclusion of certain...

  • Page 35: Paid After-Sales Service

    PELLENC Products are guaranteed under the commercial warranty as from delivery to the customer for a period of two (2) years for products connected to a PELLENC battery, and for a period of one (1) year for other PELLENC products.
  • Page 36 Paid after-sales service also covers original PELLENC spare parts, excluding labour and outside the legal and commercial warranty period. In case of replacement of original PELLENC spare parts in the context of after-sales service, said latter are covered by a warranty of one year as from the installation date.

  • Page 37: Ec Statement Of Compliance

    BLOWER AIRION 3 57 - 147010-C 11. EC STATEMENT OF COMPLIANCE 11.1. "EC" DECLARATION OF CONFORMITY: AIRION 3 MANUFACTURER PELLENC ADDRESS Quartier Notre-Dame - 84120 Pertuis (France) ENTITY AUTHORIZED TO COMPILE THE TECHNICAL FILE PELLENC ADDRESS Quartier Notre-Dame - 84120 Pertuis...
  • Page 40 PELLENC Quartier Notre Dame - 84120 Pertuis (France)

Table of Contents