Supplies Needed - Weber 2200 Series Instructions Manual

Assembly

Supplies needed

You will need a soap and water solution to check for gas
leaks. (See Step "Check for gas leaks.")
Refer to exploded view if replacement parts are needed.
Your LP tank is shipped empty for safety. After setting
the LP fuel scale you will need to fill it. (See Step "Fill
LP tank.")
While we give much attention to our products, unfor-
tunately an occasional error may occur. If a part is
missing, do not go back to the store. Call the Weber
Customer Service Center toll free 1-800-446-1071 to
receive immediate assistance. Have your owner's
manual available for reference.
Step 1
Removal of all tape
Remove tape from the following locations:
front and rear of side work tables
swing tables
swing table slide bars
bottom tray beneath the cooking box
bottom accessory trays
Figure 1
Step 2
Remove packaged parts
Remove and unpackage warming rack, Weber Warm-Up
Basket, 2 cooking grates, cardboard box (which contains
cookbook and warranty card), 8 short stainless steel
Flavorizer Bars and 5 long stainless steel Flavorizer
Bars.
Note - Be sure no packaging material is left in the
cooking box before reinstalling parts.
2
Warming basket
Weber Warm-Up
Cooking grates
Short Stainless
Steel Flavorizer
Long Stainless
Steel Flavorizer
Figure 2
Basket
Bars
Bars