Weber PLATINUM SERIES 2 2200 NG User Manual page 10

INSTALL WORK SURFACE
AND SIDE BURNER
FOR THE PLATINUM SERIES II 3400
You will need... left work surface, side burner assembly,
four 1/4-20 x 1/2 inch bolts, four nylon washers and a
7/16 inch or adjustable wrench.
Insert the left work surface tabs in the slots to the left of
the cooking box. Figure 16 (a). Slip washers on the bolts
and insert the bolts as shown. Tighten. Figure 16 (b).
To install side burner
Note: Remove protective covers from tabs of
side burner.
Insert the side burner assembly tabs in the slots to the
right of the cooking box. Figure 16 (c). Slip washers on
the bolts and insert the bolts as shown. Tighten.
Figure 16 (d).
Side burner can only be installed on right side of
barbecue.
(a)
View from
left side
(b)
Left panel
View from left side
Platinum Series II 3200
10
Tabs
View from right
Figure 16
(c)
View from
right side
(d)
underside