Bosch myMUM MUM5 7S Series User Manual page 46

en Troubleshooting
Fault
The swivel arm cannot be
opened or closed because
the tool is jammed in the
bowl.
46
Cause
Drive is not in the parked po-
sition after a safety system
has stopped processing or
the power supply has been
interrupted.
troubleshooting
Set the rotary switch to
1.
Eliminate the problem that caused
2.
the appliance to stop.
→ "Safety systems", Page 38
When the swivel arm is open, re-
3.
move the tool and close the swivel
arm.
Set the rotary switch briefly to and
4.
then back to
a The drive remains on for a short
time until the parked position is
reached.
⁠ .
⁠ .