Table of Contents
Advertisement
Available languages
Available languages
Installation and Operating Instructions
Z
FIRE PROTECTION
Casing types ELS-GUBA
4 .2
Flush-mounted casing ELS-GUBA with fire damper / also for second room
The flush-mounted casing ELS-GUBA with fire damper and airtight metal backdraught shutter are designed for installa-
tion in residential units with K90 or K90K requirements outside of appropriate shafts in connection with steel or steelflex
ducting. The discharge spigot to the top (DN 80) can easily be used to the back by using the conversion kit ELS-ARS
(accessories).
The electrical connection with the fan takes place via a plug contact integrated in the casing. A plaster protection cover
is included in the scope of delivery.
The casing can be converted for the ventilation of bathrooms and WCs in residential units by using the second room kit
ELS-ZS (accessories) (see page 8, section 4.2 Installation Second room kit).
Flush-mounted casing ELS-GUBA: Conversion kit Discharge spigot to the back
Conversion of casing type ELS-GUBA with conversion kit ELS-ARS (accessories) for discharge spigot to the back.
ë
Fig.5
Remove ramp
Fig.6
The discharge spigot
ö
Fig.7
Remove cover
Push rivets (4 pcs) out of frame from below. Then remove discharge spigot
casing.
Fig.8
Insert the discharge spigot
fasten. Attach cover
Fig .5
ä
ë
Fig .7
ä
from casing in direction of arrow. (The ramp has no other uses in this installation).
ä
with metal backdraught shutter is attached to casing with rivets (4 pcs).
on back of casing by rotating (symbol
ä
into back of casing from inside. Insert the new rivets (4 pcs) in the frame to
ö
to top of casing by rotating (symbol
Fig .6
Fig .8
ö
ö
7
).
ä
downwards from the
Ï
).
ä
ä
EN
Advertisement
Chapters
Table of Contents
