Els-Guba Plastic Casing With Fire Damper; Installation Location / Position - Helios ultra Silence ELS-GUBA Installation And Operating Instructions Manual

Installation and Operating Instructions
CHAPTER 3
ELS SCOPE OF DELIVERY
AND ASSEMBLY
CHAPTER 4
INSTALLATION
+
NOTE
Casing types ELS-GUBA
3 .0

ELS-GUBA plastic casing with fire damper

– suitable for installation in buildings with fire protection requirements K90 and appropriate fire protection shaft.
Installation outside appropriate fire protection shaft in combination with steel/steelflex ducting DN 80 mm.
Scope of delivery / Packaging unit, Fig.1
3 .1
ELS-GUBA Flush-mounted casing
ä
ë
Å
ò
Flush-mounted casing ELS-GUBA with fire damper and electrical plug connection
ä
Discharge spigots with airtight metal backdraught shutter incl . return spring, convertible
ë
Ramp
ö
Cover convertible with bayonet lock
ü
Cable grommet
Å Plaster protection cover against contamination
4 .0

Installation location / position

ELS
WC
ELS
ELS-ZS
If the ELS casings are used in highly resonant lining boards (e .g . chipboard, gypsum or fibre silicate boards),
then the transmission of structure-borne sound must be prevented with elastic spacers .
A distance of 20 cm from the ELS casing to the wall and ceiling is recommended for the side inflow .
Fig .1
ö
ò
ü
Fig .2
ELS
Domestic kitchen
ELS
5
Fig .3
Fig .4
EN