Chapter 16. Front Console Board Replacement; Front Console Board Replacement Overview; Replacing The Front Console Board - Nvidia DGX-2 System Service Manual

Chapter 16. Front Console Board
16.1. Front Console Board Replacement
Overview
This is a high-level overview of the procedure to replace the front console board on the DGX-2
System.
1. Unpack the new front console board.
2. Shut down the system.
3. Using a Phillips 2 screwdriver, release the captive screws.
4. Pull the front console board out of the system.
5. Insert the new front console board.
6. Tighten the screws.
7. Power on the system
16.2. Replacing the Front Console Board
A front console board malfunction can be determined by either
‣
No display or connectivity occuring after plugging in a keyboard and monitor to the front of
the system, or
‣
The BMC system event log indicating a front temperature sensor failure.
Raise a ticket with NVIDIA Enterprise Services to request a replacement.
When the new board arrives, unpack it and keep the packaging to use for sending back the old
board.
DGX-2 System
Replacement
DU-09224-001 _v09 | 66