Jumper - MSI IMGS45-M User Manual

MS-9871
J
uMper
Clear CMOS Jumper: JBAT1
There is a CMOS RAM on board with an external battery power supply to
preserve the system configuration data. With the CMOS RAM, the system
can automatically boot OS every time it is turned on. If you want to clear the
system configuration, set the jumper to clear data.
1
1
JBAT1 1
Keep Data Clear Data
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return
to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will
damage the mainboard.
LVDS Power Jumper: J1
Use this jumper to specify the LVDS power.
1
+5V
+12V
J1
1 1
1
+3V
2-17