Table of Contents
Advertisement
Quick Links
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
HDL106 - Luminaires
ATEX & IECEx
Important:
Please read these instructions carefully before installing or maintaining this equipment. Good
electrical practices should be followed at all times and this data should be used
as a guide only.
Weight 6kg
Windage – 0.045m²
I-HDL106-02.doc
Issue 11
11/05/2020
IOM – HDL106 Luminaire (ATEX & IECEx)
1
Advertisement
Table of Contents
Related Manuals for Chalmit HDL106 Series
Summary of Contents for Chalmit HDL106 Series
- Page 1 IOM – HDL106 Luminaire (ATEX & IECEx) INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS HDL106 - Luminaires ATEX & IECEx Important: Please read these instructions carefully before installing or maintaining this equipment. Good electrical practices should be followed at all times and this data should be used as a guide only.
-
Page 2: Specific Conditions Of Use
IOM – HDL106 Luminaire (ATEX & IECEx) Type Of Protection Ex e mb (Increased safety,encapsulation), Ex tb (dust) Protection Standards (IEC) EN 60079-0, (IEC) EN 60079-7, (IEC) EN 60079-18, (IEC) EN 60079-31 Area Classification Zone 1 and Zone 2 areas to (IEC) EN 60079-10-1 Zone 21 and Zone 22 areas to (IEC) EN 60079-10-2 Installation (IEC) EN 60079-14... - Page 3 IOM – HDL106 Luminaire (ATEX & IECEx) 1.0 Introduction The Chalmit HDL106* range brings to hazardous areas the very latest in lighting technology. It is a compact light source that uses ultra bright light emitting diodes to provide light from mains power. The LEDs are maintenance free and can last up to 80,000 + hours @ 25°C ambient.
-
Page 4: Electrical Supplies
Remove the front cover and then remove the LED array assembly. Care must be taken when disconnecting and reconnecting wiring. If required contact Chalmit Technical. 4.0 Mounting Luminaires should be installed where access for maintenance is practical and in accordance with any lighting design information provided for the installation. - Page 5 If in doubt, the unit should be returned to Chalmit for examination and, if necessary, replacement. Before re-assembling, all connections should be checked and any damaged cable replaced.
-
Page 6: High Voltage
IOM – HDL106 Luminaire (ATEX & IECEx) HIGH VOLTAGE I-HDL106-02.doc Issue 11 11/05/2020... -
Page 7: Low Voltage
IOM – HDL106 Luminaire (ATEX & IECEx) LOW VOLTAGE Note: For 24 LED luminaires, there will only be one LED array connected to the terminal block. I-HDL106-02.doc Issue 11 11/05/2020... - Page 8 IOM – HDL106 Luminaire (ATEX & IECEx) EU-Declaration of conformity UE-Déclaration de conformité EU-Konformitätserklärung Manufacturer Chalmit Address 388 Hillington Road, Glasgow. G52 4BL Scotland UK Product HDL 106 Modular Floodlight/Bulkhead EU - Type Examination Certificate Sira 09ATEX5159X Notified Body CSA Group Sira...
- Page 9 2011/65/EU RoHS II Directive On behalf of the Chalmit, I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment conforms to all technical and regulatory requirements of the above listed directives.