Advertisement
BODY
CHECK THE PASSENGER AIRBAG
NEGATIVE LINE FOR ISOLATION FROM
POWER
Measure the voltage between:
(+) Red Probe of Multimeter
Vehicle Battery
Positive terminal
Is the voltage more than 3.7 V?
YES
An intermittent fault may be present in the wiring
harness. Visually check for chaffed wires or other
physical damage to the harness. If no fault is found
in the circuit, suspect the following component(s):
a) PAB connector
b) Airbag module connector
c) PAB assembly
d) Airbag module.
SCORPIO
(-) Black Probe of Multimeter
Airbag Simulator, Fitted in PAB harness
Black Colour extension
NO
Replace the CCB wiring harness and reactivate the
system.
(Refer to Reactivation sheet.)
AIRBAG
SRSD2
47
Advertisement
