Advertisement
BODY
AIRBAG
Restart the diagnostic tool and establish the communication with Airbag Module.
Select the LID3 tab in the diagnostic tool as shown above.
Read the PAB resistance value
The specified range for PAB is 2.0 to 3.0 ohms
Is the resistance within the specified range?
YES
No
Install the new PAB assembly
If the resistance is more than 5.5 ohms GO to SRSJ3
(Refer the repair manual for the installation
If the resistance is less that 1.9 ohms GO to SRSJ4
procedure.)
SCORPIO
129
Advertisement
