Advertisement
BODY
CHECK FOR THE OPEN CIRCUIT IN DAB
LINES WITHOUT CLOCK SPRING
Disconnect Clock spring connector (Refer to repair manual for the removal procedure)
Measure the resistance between:
(+) Red Probe of Multimeter
Clock Spring connector, harness side
Pin 3
Is the resistance less than 1.0 Ohm?
YES
Install the New Clock Spring assembly
(Refer to repair manual for the installation
procedure)
SCORPIO
(-) Black Probe of Multimeter
Clock Spring connector, harness side
Pin 4
Replace the CCB wiring harness
AIRBAG
SRSI4
NO
120
Advertisement
