Table of Contents
Advertisement
a. "–3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button": provide user
the ability to do real-time overclock adjustment.
Warning:
Manually overclock is potentially dangerous, especially when the overclocking
percentage is over 110 %. We strongly recommend you verify every speed you
overclock by click the Verify button. Or, you can just click Auto overclock button and
let [ WarpSpeeder™ ] automatically gets the best result for you.
b. "Recovery Dialog button": Pop up the following dialog. Let user select a restoring
way if system need to do a fail-safe reboot.
d.
"Auto-overclock button": User can click this button and [ WarpSpeeder™ ] will set
the best and stable performance and frequency automatically. [ WarpSpeeder™ ]
utility will execute a series of testing until system fail. Then system will do fail-safe
reboot by using Watchdog function. After reboot, the [ WarpSpeeder™ ] utility will
restore to the hardware default setting or load the verified best and stable
frequency according to the Recovery Dialog's setting.
e.
"Verify button": User can click this button and [ WarpSpeeder™ ] will proceed a
testing for current frequency. If the testing is ok, then the current frequency will be
saved into system registry. If the testing fail, system will do a fail-safe rebooting.
After reboot, the [ WarpSpeeder™ ] utility will restore to the hardware default
setting or load the verified best and stable frequency according to the Recovery
Dialog's setting.
Note:
Because the testing programs, invoked in Auto-overclock and Verify, include
DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime library is
required. And please make sure your display card's color depth is High color (16 bit)
or True color( 24/32 bit ) that is required for Direct3D rendering.
M
7
V
I
Z
4
0
0
M
7
V
I
Z
4
0
0
M
7
V
I
Z
4
0
0
22
Advertisement
Table of Contents
