Mazda CX-8 Quick Manual page 506

Maintenance and Care
Owner Maintenance
Running lights (Type A)

*
Front fog lights

Side direction indicator lights

Brake lights (Type A)

Brake lights/Tail lights (Type A)

Reverse lights

High-mount brake light

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorised Mazda
Repairer if the replacement is necessary.
Bulb type
Front direction indicator lights, Position
lights (Type B)
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the bonnet.
Refer to Bonnet on page 6-11.
3. Turn the socket and bulb assembly
anticlockwise and remove it.
4. Disconnect the bulb from the socket.
Front direction indicator lights
6-36
*Some models.
Position lights
5. Install the new bulb in the reverse
order of the removal procedure.
Running lights (Type B)
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. If you are changing the right bulb, start
the engine, turn the steering wheel all
the way to the left, and turn off engine.
If you are changing the left bulb, turn
the steering wheel to the right.
3. Pull the centre of each plastic retainer
using a flathead screwdriver and
remove the retainers, and then partially
peel back the over fender.
*
Removal
Installation