Mazda CX-8 Quick Manual page 444

Interior Features
Audio Set
Symptom
Pairing cannot be performed again
It takes time for automatic connec-
tion
Unable to perform pairing
Does not connect automatically
when starting the engine
Automatically connects, but then
disconnects suddenly
Disconnects intermittently
5-78
Cause
The pairing information paired to
®
the Bluetooth unit or device is not
recognised correctly.
There are a lot of paired Bluetooth
devices.
®
The Bluetooth function and the
Find Mode/Visible setting
device may turn off automatically
after a period of time has elapsed
depending on the device.
The device is in a location in which
radio wave interference can occur
easily, such as inside a bag in a rear
seat, in a rear pocket of a pair of
pants.
Solution method
Perform pairing using the following
procedure:
1. Delete the applicable Blue-
®
tooth
Connect.
2. Delete "Mazda" from the Blue-
®
tooth
Bluetooth
3. Perform pairing again.
If pairing is not possible after trying
the procedure, turn off the power of
the Bluetooth
turn it back on. If pairing is still not
possible after this, contact an expert
repairer, we recommend an Author-
ised Mazda Repairer.
Delete the pairing information for
unused Bluetooth
®
If it takes time for an automatic con-
nection even though the above oper-
ation has been done, do a manual
connection.
Check whether the Bluetooth
*1
on the
tion and the Find Mode/Visible set-
*1
ting on the device are turned on
and pairing or reconnect.
Move the device to a location in
which radio wave interference is
less likely to occur.
device on the Mazda
search screen of the
®
device.
®
device once, then
®
devices.
®
func-