Mazda CX-8 Quick Manual page 164

Before Driving
Windows
If the battery was disconnected during
vehicle maintenance, or for other reasons
(such as a switch continues to be operated
after the window is fully open/closed), the
window will not fully open and close
automatically.
The power window auto function will only
resume on a power window that has been
reset.
1. Switch the ignition ON.
2. Make sure that the power window lock
switch located on the driver's door is
not depressed.
3. Press the switch and fully open the
window.
4. Pull up the switch to fully close the
window and continue holding the
switch for about 2 seconds after the
window fully closed.
5. Make sure that the power windows
operate correctly using the door
switches.
▼ Jam-safe Window
If foreign matter is detected between the
window and the window frame while the
window is closing automatically (refer to
Auto-opening/Closing on page 3-31), the
window stops closing and automatically
opens partway.
NOTE
The jam-safe function may operate

under the following conditions:
A strong impact is detected while the

window is closing automatically.
Window is closing automatically in

very low temperatures.
3-32
In the event the jam-safe function

activates and the power window cannot
be closed automatically, pull and hold
the switch and the window will close.
The jam-safe window function does not

operate until the system has been reset.