Parallel Port Configuration - Asus AAEON FWS-7831 User Manual

3.4.6.2

Parallel Port Configuration

Options Summary
Use This Device
Enable/Disable this Logical Device
Possible:
Allow user to change Device's Resource settings. New settings will be reflected on This
Setup Page after System restarts.
Mode
Change Parallel Port mode. Some of the Modes required a DMA resource. After Mode
changing, Reset the System to reflect actual device settings.
Chapter 3 – AMI BIOS Setup
Disabled
Enabled
Use Automatic Settings
IO=378; IRQ=5;
IO=378; IRQ=5,6,7,9,10,11,12;
IO=278; IRQ=5,6,7,9,10,11,12;
IO=3BC; IRQ=5,6,7,9,10,11,12;
Standard Parallel Port mode(SPP) Optimal Default, Failsafe Default
EPP Mode
ECP Mode
EPP mode & ECP mode
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
48