Frigidaire FFRU20F4V Getting Started
Frigidaire FFRU20F4V Getting Started

Frigidaire FFRU20F4V Getting Started

20 cu ft refrigerator

Advertisement

GETTING
WITH YOUR
FRIGIDAIRE 20 CU FT REFRIGERATOR
BEFORE YOU START

Set up your refrigerator

Prior to using the refrigerator, make sure it is located on a floor that is level and
strong enough to support it fully loaded. Check out INSTALLATION in your Use &
Care Guide to see how to set the anti-tip bracket.

Before operating for the first time

Clean the inside of your appliance before using it. See the CARE AND CLEANING
section in your Use & Care Guide.
YOU'RE IN CONTROL

Set your refrigerator temperature

It's easy! When first turning your appliance on, adjust to
Recommended. To ensure safe food storage, allow the appliance to
operate with the door closed for at least 8 hours before loading it
with food. If necessary, we recommend you adjust the temperature
gradually, in small increments, allowing the temperature to stabilize.
1. For warmer temperatures, adjust the setting to Cold. For colder
temperatures, adjust the setting to Coldest.
2. The control can be left at the factory preset
(Recommended) or adjusted as desired.
3. If the temperature inside the cabinet increases, the red High Temp* light
will illuminate and the alarm will sound.
4. The Chill Boost* mode quickly drives the appliance to a colder
temperature and stays active for up to 24 hours before automatically
deactivating or being manually exited.
5. Pressing the Temp* button will allow you to scroll through the five
temperature settings from Cold (top) to Coldest (bottom), and then loop
back to Cold.
*Refer to your Use & Care Guide for detailed information.
3
4
1
2
5
A19273401 (2002)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FFRU20F4V and is the answer not in the manual?

Questions and answers

Summary of Contents for Frigidaire FFRU20F4V

  • Page 1 GETTING WITH YOUR FRIGIDAIRE 20 CU FT REFRIGERATOR BEFORE YOU START Set up your refrigerator Prior to using the refrigerator, make sure it is located on a floor that is level and strong enough to support it fully loaded. Check out INSTALLATION in your Use &...
  • Page 2 If it seems they’re vibrating too much, try moving the refrigerator slightly. Find more troubleshooting tips in the back of your Use & Care Guide. LET’S MAKE IT OFFICIAL! Take the first step to becoming a part of the Frigidaire family by registering your refrigerator. Look for the Photoregister icon on your registration card.

Table of Contents