Advertisement
Cleaningthe glass cooktop, some me /s;
AmericanaAppliancescom
I
Cleanyour cooktopafter
each spill. UseCERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use GERAMA BRYTE®Geramic
Gooktop Gleaner on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface ofyoux
glass cooktop, follow these steps:
Befoxe using the cooktop
fox the
fi_st time, clean it with GERAMA
BRYTE ® Gex_mdc Gooktop
Gleanex.
This helps protect
the top and makes
cleanup
easiex.
[_
Daily use of GERAMA BRYTE®
Geramic Gooktop Cleaner will help
keep the cooktop looking new.
%
Shake the cleaning cream well. Apply
a few drops of GERAMA BRYTE®
Gex_mdc Gooktop Gleaner directly
to the cooktop.
Use a papex towel or GERAMA
BRYTE®Gleaning Pad for Geramic
Gooktops to clean the entire cooktop
sulface.
Use a dry cloth ox papex towel
to remove all cleaning
residue.
No need to rinse.
NOTE:It is veryimportantthat you DONOTheat
thecooktopuntil it hasbeencleanedthoroughly.
Use a CERAMA BRYTE_ Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING:>wG to y.our
glass surfacemay. o ccurif you usescrubpads
other than thoserecommended.
77
Allow the cooktop to cool.
[_
Spread a few drops of GERAMA
BRYTE®Gemmic Gooktop Gleaner
on the entire burned residue area.
%
Using the included
GERAMA
BRYTE®Gleaning Pad fox Gemmic
Gooktops, rub the residue area,
applying
pressure as needed.
If any xesidue remains, repeat
the steps listed above as needed.
Fox additional
pxotection,
after
all residue has been xemoved, polish
the enti_e surface with GERAMA
BRYTE®Gmamic Gooktop Gleaner
and a paper towel.
%
The CERAMABRYTE_ Ceramic
Cooktop Scraper and all
recommended suppfies are
available through our Parts Center
See instructions under "To Order
Parts" section on next page.
NOTE'.Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Use a single-edge
razox blade
scraper at appxoximately
a 45 ° angle
against the glass surface and scrape
the soil. It will be necessary to apply
pressure
to the razor scraper in
oxder to xemove the xesidue.
%
After scxaping with the xazox
scraper, spread a few dxops of
GERAMA BRYTE®Geramic Gooktop
Gleanex on the enfi,e burned residue
area. Use the GERAMA BRYTE®
Gleaning Pad to remove any
remaining
residue.
Fox additional
pxotection,
aftex all residue has been removed,
polish the enti_e surface with
GERAMA BRYTE®Geramic Gookmp
Gleaner and a paper towel.
29
Advertisement
