Maintenance And Care; Malfunctions; After Sales Service; Spare Parts - SATA air regulator Operating Instructions Manual

ing protection hood. To do this, turn the regulator all the way closed
and then slowly turn to open it again when the spray gun is pressed (if
fitted).
The breathing protection equipment is operationally ready.

10. Maintenance and Care

The air regulator needs no maintenance. Spare parts are available for
carrying out repairs (see chapter 13).

11. Malfunctions

In the event of unexpected malfunctions, send the product to the SATA
customer service department. (For address see chapter 12).

12. After Sales Service

For accessories, spare parts and technical support, contact your SATA
dealer.

13. Spare Parts

Art.
No.
211904
[8-1]
213751
[8-2]
14. EU Declaration of Conformity
We hereby declare that, in its design and construction as well as in the
version as it is produced and distributed by us, the product described in
the following corresponds to the fundamental health and safety require-
ments of Directive (EU) 2016/425 as well as the fundamental safety re-
quirements of EC-Directive 2014/34/EU including any changes applicable
at the time of this declaration.
This Declaration loses its validity in case of any alteration to the device
that has not been approved by us.
The manufacturer bears the sole responsibility for the issuance of this
declaration of conformity.
Manufacturer
SATA GmbH & Co. KG
Domertalstrasse 20
D-70806 Kornwestheim
Product description
■ SATA air regulator
Operating instructions SATA air regulator
Description
Package with 4 CCS-disks (sorted by colour,
in bag)
Cover bracket, complete
EN
Num-
ber
1 pc.
1 pc.
63