Jack Ring (B), Jack Hook (B) (Balanced Standard Side) - Sony NW-WM1A Service Manual

2-12. JACK RING (B), JACK HOOK (B) (BALANCED STANDARD SIDE)

bottom side
Slant.
–
4 Rotate the jack hook (B)
counter-clockwise to
remove the lock.
tweezers,
jack hook (B)
etc.
front side
5 jack hook (B)
OK
NG
Wrinkle.
Raised.
–
1 Align the jack hook (B) with the hole
shape of the cabinet and install.
top
side
2 Rotate the jack hook (B)
clockwise.
top side
2 adhesive sheet (ring)
3 jack ring (B)
1 Insert the clip, etc. into the hole from the inner side
of the cabinet, and then push the jack ring (B) block
upward from the inner side.
top
clip, etc.
hole
side
OK
No gap. (The adhesive
sheet is not protruding)
NW-WM1A/WM1Z
3 Lock the two
claws.
– –
3 Lock the claw.
jack ring (B) block
cabinet
top side
hole
clip, etc.
NG
Gap. (The adhesive
sheet is protruding)
23