ASSEMBLY INSTRUCTIONS CONTINUED
TABLE ONE
3) ATTACH SIDE BEAMS
a) Place the sidebeams into position between the legs at either
end of the table, aligning the pre-drilled holes with those in
the tabletop. Insert the caphead screws with washers into each
of the pre-drilled holes and tighten firmly with an Allen key.
4) TURN THE TABLE INTO AN UPRIGHT POSITION
a) With the help of 3 or 4 friends, carefully turn the table
over into an upright position, taking care not to place any
weight/force on the table legs while turning.
0
6
M
A
N
U
E
L
A
I
R
E
S
M
A
T
E
U
S