Voip Interface Configuration - Huawei EchoLife HG8240 Service Manual

5 Web Page Reference
5.9 Voice
This topic describes how to configure the voice service through the Web page.

5.9.1 VoIP Interface Configuration

5.9.2 VoIP User Configuration
5.9.1 VoIP Interface Configuration
l
Figure 5-30 VoIP Interface Configuration - SIP protocol
5-32
NOTE
The Web page for configuring the voice service varies with the loaded voice protocols. The following
topics describe the Web pages after the H.248 protocol and the SIP protocol are loaded.
l Device software version V100R002C00 supports the SIP protocol.
l Device software version V100R002C01 supports the H.248 protocol.
Configuring VoIP Interface - SIP Protocol
1. In the navigation tree on the left, choose Voice > VoIP Interface Configuration. In
the pane on the right, parameters of a VoIP interface can be configured, including the
IP addresses of the primary server and secondary server, and digitmap, as shown in
Figure 5-30.
2. Click Apply to apply the configuration.
Table 5-14 describes the parameters used for configuring a VoIP interface based on the
SIP protocol.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Issue 04 (2011-01-12)