Reversing The Door - LG RT8DIHP Owner's Manual

Reversing the door

You can reverse the door for your convenience.
WARNING
• Do not reverse the door while the appliance is
stacked on a washing machine.
• Before removing the hinge screws, have an
assistant support the weight of the door. The
door could fall on the floor due to the weight of
the door.
• For safety reasons, two or more people need to
work together to reverse the door.
NOTE
• The appearance of the screws varies and the
screws must be inserted differently depending
on the position. Make sure the screw is
properly selected before tightening.
1
Open the door and remove 2 screws on the
door hinge. After removing the screws, put the
door down carefully with the front side facing
down to the floor.
Door hinge
WARNING
• Remove the lower screw first. The door may
fall on to the floor due to its weight and the door
can be damaged.
Cabinet
2
Remove 8 screws on the hinge assembly from
the door.
• There are 6 screws on the front and 2
screws on the side.
Hinge
assembly
3
Remove the 3 screws from the door latch
assembly which is fixed between the door
and the hinge assembly, and then remove the
screw which is fixed on the door hook.
4
Switch between the position the hinge
assembly and door latch assembly and then
tighten the screws in reverse order.
• Tighten the screw in proper position
referring from 2 to 4 steps.
Door latch
assembly
EN
Door latch
assembly
Hinge
Assembly
13