Page 1
(2) ¼” – 20 S.S. Lock Nuts (6) M6 – 1.0 S.S. Flange Nuts Inspected and Packaged By: Date: For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929 Mon.–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com Page 1 of 7...
Page 2
For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929 Mon.–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com Page 2 of 7...
Page 3
Rigid E Series Light Bars also fit where Baja Designs Onx6 fits. *Baja Designs OnX6 requires SDHQ Center Support Kit (SDHQ-53-1110-G3)(OnX6 only fits TRD Pro and 18’ standard grilles) *Installing Baja Designs S8 in TRD Pro top opening requires SDHQ Center Support Kit (SDHQ-53-1110-G3) (minor trimming...
Page 4
Work your way along the bottom towards the passenger side and release the bottom (3) clips. Release the last (2) clips on the passenger side underneath the headlight. For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929 Mon.–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com...
Page 5
Tighten just enough so the mount is supported. This will be tightened later. Repeat steps 6-7 for the passenger side. For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929 Mon.–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com Page 5 of 7...
Page 6
¼” – 20 x ¾” bolts can now be tightened down. 8. Wire up the lights and install the grille in the reverse order it was removed. For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929 Mon.–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com...
Page 7
Ste 109 Gilbert, AZ 85233 Phone: 480-633-2929 | Fax: 480-633-1791 www.sdhqoffroad.com Follow us on: Facebook Instagram For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929 Mon.–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com Page 7 of 7...
Need help?
Do you have a question about the 53-1202-G3 Series and is the answer not in the manual?
Questions and answers