ABB ACQ580 Quick Start Up Manual page 8

8 EN – Quick start-up guide
Example of a nameplate of an induction (asynchronous) motor:
EN
CS
DE
Check that the motor data is correct. Values are predefined
on the basis of the drive power but you should verify that
ES
they correspond to the motor.
Start with the motor type. Go to the edit view of a selected
FI
row by pressing
FR
Scroll the view with
Motor nominal cos Φ and nominal torque are optional.
IT
Press (Next) to continue.
PT
Adjust the limits according to your needs.
RU
• Go to the edit view of a selected row by pressing
•
Scroll the view with
SV
Go to the next view by pressing
TR
If you want to make a backup of the settings made so far,
select Backup and press
If you do not want to make a backup, select Not now and
press (Next).
Note:
The control panel has space for one automatic backup. Drive
creates an automatic backup two hours after the last para-
meter change.The panel checks for additional parameter
changes at intervals of 24 hours. The new backup will over-
write the previous backup only when the last change has
passed two hours.
.
and .
and .
(Next)
(Next).
.