Kogan KAGWAS10D6A User Manual page 17

Before using the washer
Before washing clothes for the first time, you must run a complete cycle without clothes.
Connect the power and turn on the tap, turn the knob to position "Daily" and press
"start/pause".
This will remove any excess water within the unit from final quality control testing and
ensure the product is clean and ready for use.
1. Connect the inlet hoses well and turn on the tap.
2. After making sure the power socket is grounded reliably, insert the power plug into
the power socket.
3. Place the drain hose correctly as per the instructions above.
Preparation of clothes
Diagram 1
1. Sort the laundry by colour and by care label. Most garments have a textile care
label in the collar or side seam.
2. Make sure all the pockets are empty, Foreign objects (e.g. nails, coins, paper clips
etc.) can cause damage to garments and components in the machine.
3. Close any zips, fasten hooks and eyes etc., before washing.
4. Dark textiles often contain excess dye and should be washed separately several
times before being included in a mixed load. Always wash whites and colours
separately.
5. Badly soiled areas, stains etc. should be pre-treated with liquid detergent or stain
removers before washing.
6. Turn clothes which pill easily or with woolen surfaces inside-out before putting
them into the machine.
Diagram 2 Diagram 3