Level adjustment
The machine must stand perfectly level on all four feet to ensure safe and proper operation.
Incorrect installation may increase electricity and water consumption and may cause the
machine to move about during operation.
If the machine is not level:
•
Using a spanner, turn the locknut in a clockwise direction to loosen. Then turn
locknuts together with adjust feet to unscrew.
•
To avoid vibrations during spinning, the machine should not be installed on soft
floor coverings.
Note:
Vibration and noise may occur if the locknuts do not sit firmly up against the housing.
Loose
High
Locknuts
Locked
Low
Adjustable feet