Troubleshooting Tables; Usb Tablet Problems - Wacom Intuos2 XD-0405-R User Manual

TROUBLESHOOTING TABLES

If you encounter problems with your Intuos2 tools or tablet, refer to the following tables. Your problem may
be described here, and you can try the solution offered. Be sure you refer to the Readme file for the latest
troubleshooting information.

USB TABLET PROBLEMS

The computer does not have
an available USB port.
The tablet status LED is off.
The pen works only in Mouse
Mode, and does not draw with
pressure-sensitivity.
USB TABLET PROBLEMS
SERIAL TABLET PROBLEMS
GENERAL PROBLEMS
WINDOWS PROBLEMS
Check if there is an available USB port on a powered USB hub.
If none are available you will need to add a powered USB hub.
Your computer must be USB ready (see
USB Ready).
Verify that the tablet's USB cable is plugged into a primary USB port
(directly into your computer) or into a powered USB hub. Make sure
the hub is connected to an active USB port. Refer to
Tablets
Run S
software.
The Wacom driver software was not installed or did not load properly.
Make sure the Wacom driver software is installed and functioning.
Insert the Wacom Tablet CD into your computer and install the driver
software for the Intuos2 tablet.
Contents
Index
for instructions.
from the Wacom Tablet CD and reinstall the Intuos2 driver
ETUP
Verifying Your Computer is
Testing USB
HAVING TROUBLE?
Page 121