Duramaxx 10029765 User Manual page 31

4. Exposure
- / + Adjust
5. Burst Mode
OFF > 2 > 3 > 4 (Off = 1 shot only)
6. Shutter / ISO
a AUTO (ISO 100~ ISO 400, It is the defaultand recommended)
b .Fast (Fixed at ISO-200 (Used for very short distance capturing setting at night to avoid
images to be too much white)
7. Date Stamp
a. Off
b. On
Video Mode
You can highlight the Video to change by pressing MENU key, now the VIDEO mode is selected.
The unit will take video clips day or night. Since a 1st event is recorded, a video-cam icon will
appear in the lower scouting LCD showing you are in video mode.
In case you would switch back for Single Picture mode, just need to turn ON camera by press-
ing CAM-PW, then select the PIC/VIDEO option simply. Accept the SINGLE Mode. Then, remem-
ber to re-boot the unit by turn off the main PW and back ON. You will see the Video-cam icon
to be disappear. Otherwise, the camera will not work properly.
There are the option items below by pressing DOWN key:
1. To Single
Yes
No
2. Movie Size
a. 1280 x 720 (HD )
b. 720 x 480
c. 640 x 480 (VGA)
3. Frame Rate
a. High
b. Low
Important: Since this unit detects batteries becoming too weak and an blank battery icon ap-
pear, the unit will stop taking any night pictures or video and take day time pictures or video
only.
The system default setting is Single Still Picture Mode for capturing colorful images at day and
monochrome images at night. Once the motion sensor does detect a motion, camera will snap
it into the memory. Scouting counter will renew the reading after each event.
31