Mercedes-Benz 190 E 2.6 1989 Owner's Manual page 94

92
Head Restraints
Removing front seat head restraints:
Move the manually adjustable head
restraint slightly forward and pull up to
the stop.
Bring the power adjustable head re­
straint to it's highest position.
Depress release button (1) beneath the
seatback covering material and pull
head restraint up sharply, holding it by
the left head restraint post (viewed in
driving direction). Then pull out head
restraint completely with both hands.
The release button (1) is located below
the left head restraint post on both front
seats.
Installing front seat head restraints :
Insert the head restraint and push it
down.
With power head restraint it may be
necessary to first push up adjustment
switch for 5 seconds.
Adjust head restraint to the desired
position.
Removing rear seat head restraints:
Pull head restraint up until detent is felt.
Then pull it out sharply using both
hands.
Installing rear seat head restraints:
Insert the head restraint and push it
down.
Adjust head restraint to the desired
position.
Warning!
For your protection, drive only with
properly positioned head re­
straints.
Do not drive the vehicle without the
seat head restraints. Head re­
straints are intended to help reduce
injuries during an accident.
For positioning of head restraints refer
to pages 32,33 and 35.