Mercedes-Benz 190 E 2.6 1989 Owner's Manual page 86

High Mounted Stop Lamp
(21 W/32 cp bulb)
To replace the bulb, pull tabs on both
sides (arrows) - using a screwdriver -
to release cover.
Press bulb down, turn counterclock­
wise and remove.
84
License Plate Lamps
(5 W bulb)
Loosen both the securing screws (1),
remove lamp and take out bulb.
Spark Plugs
This vehicle is equipped with spark
plugs as required for driving in the
USA. If additional information is
desired, your authorized
MERCEDES-BENZ dealer will be
happy to offer advice (see also rear
inside cover of Owner's Manual).
Remove and install spark plugs (pro­
vided with sealing cone) only with
combination wrench from the vehicle
tools or with a recommended spark
plug wrench. Tightening torque
1 0 -2 0 Nm (7—15 Ib-ft).