Samsung HW-S40T Full Manual page 25

11 SOFTWARE
UPDATE
Important: The update function erases all user
settings. We recommend you write down your
settings so that you can easily reset them after
the update.
Bottom of the Soundbar
DC 24V
1. Connect a USB thumb drive to your
computer.
Important: Make sure there are no music
files on the USB thumb drive. This may cause
the firmware update to fail.
2. Go to the Samsung website at
(samsung.com)
Number and enter the model of your
Soundbar. Select manuals and downloads
and download the latest software file.
3. Save the downloaded software to a USB
stick and select "Extract Here" to unzip the
folder.
4. Turn on the Soundbar and connect the USB
stick containing the software update to the
SERVICE port.
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DIGITAL AUDIO IN
(OPTICAL) SERVICE
DC 24V
select Enter Model

5. Turn on the Soundbar Within 3 minutes, the
5 led cycle sequence flashing and updating
begins. Then the 5 leds all is white, then 5 led
cycle sequence flashing again, When the
update is complete, the Soundbar will
automatically restart.
LED
Indicator
• This product has a DUAL BOOT function.
If the firmware fails to update, you can
update the firmware again.
ENG - 25
White moves from left to right
and right to left