Table of Contents
Advertisement
Available languages
Available languages
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Size
PE cloth
DESCRIPTION
Tent made of galvanised steel tubing and
UV protected PE cloth. Four earth anchors
included.
Pos. Designation
1
Longitudinal support tubes
2
Post
3
Door support tubes
4
Roof tubes
5
Corner connector, base
6
Middle connector, base
7
4-way connector
8
3-way connector, roof
9
4-way connector, roof
10
Connector
11
Door panel
12
Back panel
13
Roof tarpaulin
14
Anchor A
15
Strap, short
L2.2 x W1.57 x H1.63 m
195 g/m²
Qty
10
6
4
6
4
6
2
2
1
2
1
1
1
4
30
16
Strap, long
17
Clamping ring
18
Anchor B
19
Wire, 30 cm
20
Wire lock
ASSEMBLY
WARNING!
Do not leave the product unattended during
its assembly. This can result in personal injury
and/or material damage.
1.
First assemble the base frame as shown in
the diagram.
FIG. 1
NOTE:
Fasten the clamping ring (17) on the door
support tube (3) first.
FIG. 2
2.
Fit the posts and the upper, longitudinal
support tubes.
FIG. 3
3.
Now assemble the roof.
FIG. 4
NOTE:
The "long" part (A) of the roof tube (4)
should be on top.
4.
Fasten the door panel to the frame with
the short straps (15).
FIG. 5
5.
Fasten the roof tarpaulin as shown in the
diagram. The tarpaulin should be turned
so that the rows of eyelet reinforced holes
run along the long sides of the frame.
FIG. 6
EN
20
4
4
4
4
15
Advertisement
Table of Contents
