Step 2: Assembling The Switch Unit - Wahl 1886 Service Manual

Assembly of the hand-held appliance - Step 2: Assembling the switch unit
Step 2: Assembling the switch unit
a) Place the switch holder (with caulked contact spring) in the upper housing in
the rear switching position (Fig. 15).
Fig. 15:
b) From the outside, push the sliding switch into the switch recess in the
direction of the housing (Fig. 16).
Attention: Make sure that the guide rib of the switch dips into the
corresponding switch holder recess and that the snap-fit hooks
securely lock with the switch holder (Fig. 17).
Fig. 16
1886-4100-00 · 02 Feb 2017
rear switching position: orange (right)
front switching position: orange, semi-transparent (left)
Fig. 17
Page 24 of 39