Assembly Of The Hand-Held Appliance; Step 1: Assembling The Light Guide - Wahl 1886 Service Manual

Assembly of the hand-held appliance

4 Assembly of the hand-held appliance
Danger: The appliance must be disconnected from the mains supply during
disassembly or assembly!
Caution: For assembly and disassembly – especially with contact with electronic
components – an ESD wrist band must be worn!
Step 1: Assembling the light guide
a) Ensure that the light guide is in the correct position and then push it in the
corresponding opening of the upper housing from the outside (Fig. 14) until
the end stop has been reached.
Fig. 14
1886-4100-00 · 02 Feb 2017 Page 23 of 39