Table of Contents
Advertisement
Structural diagram of float valve
•
Confirm that the float valve, block proof cover and seal ring are correctly installed
before each use.
•
Before placing the inner pot into the cooker each time, ensure to remove any dirt
and water from the external side of the inner pot, and the internal side of the
external pot.
•
Always move the product using the handles on the cooker body. Remove any
water from the housing cover with a cloth.
Note:
1.
Exhaust valve: Pull out the exhaust valve from the lid. Clean the exhaust valve and
float valve with a brush and cloth at least once a month.
2.
Sealing gate: Remove oil and dirt from the sealing gate with mild detergent and a
brush. Oil and dirt in the sealing gate may cause a yellowed appearance; after
washing, it should return to the original stainless-steel colouring. It is suggested to
clean the sealing gate once every 2 months.
3.
Water box: After cooking, the steam may condense in the water box of the
external pot. Water in the box should be removed to avoid unpleasant odours, and
the box wiped with a clean cloth.
Advertisement
Table of Contents
