Technical Data - Heinner HBS-150-PK Manual

www.heinner.com
1. Find the lithium cell in the packet and battery holder at the back of the scale,
open the cover, install the battery into the holder and cover it back (make sure
the positive pole of the battery is upwards).
2. Place the scale on hard and flat surface. Clean floor is best.
3. Step on the scale directly and the weight will display.
4. Stay still on the glass platform. During weighting, indication will be flashing on
the display. Wait till the indications stop flashing. Your weight will be displayed
for about 10 seconds, and then the unit will switch off automatically.
5. Please check the battery if the scale malfunctions. Change a new piece if
necessary. For other problems, please contact your dealer or the authorized
service.
6. Please use soft tissue with alcohol or glass cleaner to clean the surface if it is
dirty. Do not use soap or other chemicals.
V. TECHNICAL DATA
Weighting capacity:
Power:
Graduation:
Display:
Measuring units:
6-150Kg
1x3V CR2032 Lithium batteries
0.1Kg
LCD
Kg/ Lb/ St
1x CR2032 3V, 150Kg
8