Intended Use; Before First Use; Included; Start Up - Westfalia LT536 Manual

Intended Use

The air hammer has been exclusively designed for chiselling and chipping
stone, concrete and masonry.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks
and is regarded as use that is contrary to the intended purpose. The
operator is liable for any damage caused by improper use.

Before first Use

Unpack the air hammer set and check all parts for any damage in transit.
Dispose of packaging materials or store it out of reach of children. Plastic
bags etc. may become a deadly toy for children.

Included:

1 Air Hammer
1 Retaining Spring
5 Chisels
1 Air Quick Coupling Adaptor
1 Oil Can (without content)
Start-up
The air hammer is equipped with an R ¼" air inlet (4). For your own safety
it is not recommended to use a permanent connection between the air
hammer and the air hose, but use the supplied quick coupling adaptor (7)
instead.
Seal the end of the quick coupling adaptor (7) with Teflon tape before you
screw it onto the air connection (4) of the air hammer.
The air hammer has to be provided with lubricating oil during operation.
Before each use add oil through the air fitting (4) or use an oil-fog
lubricator.
Also read the chapter "Lubrication".
Operating
10