How To Use - URBANGLIDE SUV100 BT Instructions Manual

H
OW TO USE
Self-balancing electric scooter adapts dynamic equilibrium, using internal gyroscope and
acceleration sensors. The status of the electric scooter is controlled by the center-of
gravity. And it is adjusted by motor which is controlled by servo control system. When
you lean forward, it will sense your actions to accelerate. When you need to swerve, slow
it down and move your foot forwards or backwards then the center-of gravity of the body
moves left or right therefore the scooter can realize left or right.
Self-balancing electric scooter has inertial dynamic stabilization system, so it can keep
anterior-posterior balance but cannot guarantee the left and right. So, when swerved, the
scooter need operating slowing, otherwise, you may get injured because of the large
centrifugal force.
Step 1: Press the power switch to turn on self-balancing electric scooter. A green light
will come on to indicate that the product is on.
Step 2: Firstly, step on one foot trigger the foot-switch, the system will come into self-
balancing condition. Then step on the other foot to operate it.
Step 3: Take control of the scooter forwards or backwards, do remember magnitude of
your body shouldn't be violently.
Step 4: Control the left and right direction of the scooter.
Step 5: Get off. Before you get off, make sure that the scooter is still, then step off one
foot, finally the other foot.
NOTE: If the user exceeds the maximum speed, or if the Segway is not used correctly
(non-horizontal platform), the latter will sound an alarm tone (the same as on ignition).
6 /EN