Recalling Record; How To Maintain And Store The Unit; How To Prevent A Malfunction - Bioland 3002 Instruction Manual

RECALLING RECORD

1. Press and hold the " /M " button for 2 seconds to enter the
momery mode and display the last memory when the unit is on.
2. Press the " /M " or "
3. When the unit is in momery mode, press both "
buttons for more than 2 seconds to delete the all records.

HOW TO MAINTAIN AND STORE THE UNIT

1. Use a dry , soft cloth to clean the unit. If necessary, use a cloth
lightly dampened with tap water.
2. Do not use alcohol, benzene, thinner
or other harsh chemicals to clean
the device or cuff.
3. Before measuring please wash your hands.
Do not wash or wet the wrist cuff.
" button to review the data in memory.
" and "
-19-
4. Store the unit in places far from
direct sunlight, high humidity
or dust.
/M"
5. Fold the pressure cuff and put
the unit into the store box.
Note: When the unit will not be used for a long time, be
sure to remove the batteries. Otherwise, the
batteries may leak and damage the unit.

HOW TO PREVENT A MALFUNCTION

1. Do not drop the device and avoid sudden jars or shocks.
2. Do not insert any objects into any holes.
3. Do not attempt to disassemble the unit.
4. Do not crush the pressure cuff.
5. If the unit has been stored at below 0
place for about 30 minutes before using it. Otherwise,
may get wrong measurement result.
o
C, put it in a warm
-20-