D-Link DWL-G122 Quick Installation Manual page 8

Using the Configuration Utility
For Windows Operating Systems
Status: Displays the SSID:
MAC Address of the Identifier is the name assigned
Access Point that is to the wireless network. The
associated with the factory SSID setting is set to
DWL-G122. default.
Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for peer-to-
peer networking.
Encryption: Displays the current encryption status of the
wireless connection.
TxRate: The default
setting is Auto; meaning,
TxRate settings are
automatically determined
by the DWL-G122
depending on the
distance from the access
point.
Appendix
The Service Set
Packet Count: Graphically
displays the statistics of
data transmitted and
received.
Signal Strength: The Signal Strength represents the wireless
signal between the access point and the DWL-G122. The
percentage coincides with the graphical bar.
Frequency: Displays
the current frequency
used by the adapter.
Channel: Displays the
channel information. By
default, the channel is set
to 6. Please note that the
DWL-G122 will
automatically adjust
channel depending on the
Access Point.