Mounting The Bracket To The Wall - Bose SoundTouch SA-5 Owner's Manual

Appendix B: Wall Mounting Instructions

Mounting the bracket to the wall

Use the provided mounting hardware to secure the provided mounting bracket to
the wall.
WARNINGS:
• Only wall mount the amplifier with the bracket provided with your system.
• Do not mount the bracket on the ceiling.
CAUTION: Do not place or install the bracket or system near any heat sources,
such as fireplaces, radiators, heat registers or other apparatus (including amplifiers)
that produce heat. Additionally when mounting near a TV consult your TV's owner's
guide for related mounting information.
1.
Position the mounting bracket on the wall with arrows visible and pointing up.
Tab
2. Mark the top and bottom mounting hole locations on the wall through the
bracket's mounting holes.
3. Remove the bracket.
4.
Drill two holes in the wall.
5.
Align the bracket to the drilled holes.
Note: If mounting the bracket to wallboard, you must insert the anchors into
the wall before you attach the bracket to the wall.
6. Insert and tighten screws (and anchors, if used).
26 - English
Arrow
Mounting holes