Samsung POWERbot SR1 M70 Series Quick Reference Manual page 13

6
-2
Brush and Auto shutter tool
1 Remove the brush
cover
4
Clean the auto shutter
tool
Information codes
[SR1✴M701✴✴✴ series]
✻ ✻ Refer to the user manual for steps to take for each information code on the display panel.
Information codes animation
[SR1✴M702✴✴✴, SR1✴M703✴✴✴, SR2✴M70✴✴✴✴ series]
✻ ✻ Refer to the user manual for steps to take for each Information code with
Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
2 Remove the brush
5
Reassemble the brush
Information codes
English-13
3 Clean the brush
6
Reassemble the brush
cover
mark on the display panel.