• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. LED work lamp PWLS 01-3...
Page 3
Risk of suffocation! tool in unexpected situations. Do not leave the packaging lying around. Children may use it as a dangerous toy. Caution Keep a sufficient distance from heat sources. LED work lamp PWLS 01-3...
6-7 h Colour temperature 6000 K Dimensions (packaging included, length x 72 x 76 x 260 mm width x height) Weight (packaging included) 1 kg Batteries 3 x 1.5 V, AA batteries Permitted ambient temperature (when -30 °C-75 °C stored) Operating temperature -20 °C-55 °C LED work lamp PWLS 01-3...
• protected from dust and direct sunlight 2. Remove the batteries from the device. 3. Put the battery compartment cover (3) back on the device. 4. Dispose the batteries properly. LED work lamp PWLS 01-3...
• Remove the batteries from the battery compartment (3). • If required, allow the device to cool down. • Clean the device according to the Maintenance chapter. • Store the device according to the Storage chapter. LED work lamp PWLS 01-3...
• Check the contacts in the battery compartment. Remove Notes on maintenance any dirt. The device does not require maintenance. • The LEDs may be defective. Contact the Trotec customer service. Cleaning The device should be cleaned before and after each use.
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. LED work lamp PWLS 01-3...