Power tools create sparks which may ignite the dust or fumes. • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. LED work lamp PWLS 05-10 / PWLS 06-10...
The heat generated by the charger during charging entails a risk of fire. General Power Tool Safety Warnings – Power tool • Only use the supplied USB charging cable by Trotec for use and care devicePWLS 06-10. Do not use any other USB cables.
If you store or transport the device improperly, the Designation device may be damaged. Surface LED Note the information regarding transport and storage of Transport handle with wrist strap attachment the device. LED work lamp PWLS 05-10 / PWLS 06-10...
Page 5
Dimensions (length x width x height) 40 x 160 x 125 mm Weight (packaging excluded) 370 g Batteries 4 AA 1.5 V Runtime of batteries ≥3 hours Permitted ambient temperature (when -30 °C-75 °C stored) Operating temperature -20 °C-55 °C Type of protection IP 44 Protection class LED work lamp PWLS 05-10 / PWLS 06-10...
The supplied batteries are subject to the requirements of You need 4 AA 1.5 V batteries for the device PWLS 05-10. dangerous goods legislation. Insert the batteries into the device prior to use. Please proceed as follows: LED work lamp PWLS 05-10 / PWLS 06-10...
2. Then plug the USB charging cable into the USB input of the device that you would like to charge. 3. Charge your device until it has reached the desired charging status. LED work lamp PWLS 05-10 / PWLS 06-10...
• Check USB charging cable, charger and device PWLS 06-10 for damages. Do not use the damaged device anymore if you detect any damages. Contact the Trotec customer service. • Check the fuse (home). LED work lamp PWLS 05-10 / PWLS 06-10...
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. LED work lamp PWLS 05-10 / PWLS 06-10...