Table of Contents
Advertisement
Figure 15. Lift up the LCD module
Table 8. Screw specifications — removing the LCD module
Screw
Specifications
label
3
M2.5 × 4 mm, flat-head, nylon-coated
The LCD module is not a FRU. It contains FRUs as its components. Refer to "Disassemble the LCD module"
on page 40 if you need to replace a FRU contained in the LCD module.
Remove the dc-in connector
Make sure the following FRUs (CRUs) have been removed:
"Remove the keyboard" on page 29
"Remove the upper case" on page 31
Step 1.
Pull out the plug of the dc-in cable out of the socket
CAUTION:
Hold the plug to pull it out of the socket. Do not pull the cable.
Color
Black
1
.
.
Chapter 4
Removing a FRU or CRU
Torque
3.7 – 4.0 kgf * cm
35
Advertisement
Table of Contents
