Storing A Caller Id; Dialing From Caller Id - VTech IP 5825 User Manual

Calls Log (Caller ID - Call Waiting)
• Press SEL again. Use
the Call Log entries.
• When the beginning or the end of the Call
Log is reached, a happy tone will sound.
NOTE: '!' symbol in the right hand side of the first
line indicates the call is not yet reviewed.

Storing a Caller ID

• Follow the steps in Reviewing Caller ID to
scroll to the record to be stored.
• To view alternate dialing sequences, press
the # key repeatedly. The screen will cycle
through the various dialing options (1 + area
code + number, area code + number, 1 + num-
ber, number only.) Press SEL to store the dis-
played number.
• If the Caller ID does not contain a name, you
will be prompted to EDIT NAME. Use the digit
keys to spell the name. If you make a mistake,
press the DELETE key to backspace. When
finished, press SEL.
• You will hear a happy tone then the screen
will display:
• If the Caller ID isn't able to detect a name,
ENTER NAME will be prompted. If unable to
detect the number, ENTER NUMBER will be
prompted. You will then need to add the name
or the number.
• If the phone number already exists in the
phonebook, the entry will not be stored, and
the screen will show:
• If the phonebook is full, the screen will show:
• If both name and number are missing, for ex-
ample as in a private listing, the request will
be rejected with the message:

Dialing from Caller ID

• Follow the steps in Reviewing Caller ID to
scroll to the entry to be dialed.
or to scroll through
19
VTech Com
VTech Com